123 Street, NYC, USA 212-309-7353 info@thomasstreet.net


If you notice that your water bill is a little higher than it should be, there may be an underlying issue. Trees are a common culprit for invading the sewer drain. They start from the roots and make their way to the pipes, where they will further grow and irritate any pipe openings and clog up the opening.

Here are ways on how you might detect and prevent tree roots.

Bad smell

A sewer line with roots will give out a bad smell. Once you notice this, you should call in professionals before the tree roots make their way to your house and damage your home.

Slow drains

Another sign of roots in the sewer line is a slower-than-usual drain. This plumbing issue may appear after heavy rain and windy conditions. A tree root blocking your main will slow the flow when it enters the pipes. This can be easily fixed by digging and clearing the area in front of your main pipe.

Backed up drains

If you keep noticing backed-up drains, you have roots in your sewer. A tree root will cause backups because they block the main sewer line completely when they grow.

How to prevent tree roots in your sewerage line

Here are a few tips to help you prevent tree roots from your sewer drain.

Conduct inspections

You should make it a routine to have inspections done to prevent the roots from entering the sewer line. It’s best to have a professional do this so that they can detect any potential problems early on.

Protect the main

Keep the inlet protected by placing caps on it to prevent any blockage. If you have caps, ensure they are securely placed so that debris can’t make its way there.

If you notice any of these problems, contact a professional to fix the plumbing issue.

Use chemicals

In some cases, when tree roots are detected, you may be forced to use chemicals in the sewer line. These chemicals will effectively dissolve the roots and kill them, thus preventing the sewer line from clogging up.

Remove the roots mechanically.

If the problem is too severe, you must physically dig up your main line and remove the roots. Doing so will help protect your home and prevent future issues with roots in your sewer drain.

Let the plumber check for the tree roots. If you have a serious tree root problem, let the plumber check for the tree roots in the sewer drain. A common check for roots is for your plumber to pressurize the line, which forces water and air out through the joints of the pipe. If the joint is blocked with roots, air bubbles will form, and pressure cannot escape through that section, thus indicating the existence of roots. The plumber will be able to detect roots and give you the best possible solution to help solve the issue. This will save you a lot of money in the long run.

With the above tips on how to detect and prevent tree roots in the sewer line, you must have all your plumbing issues fixed before it becomes a problem in your house.…


The dishwasher is one of the best inventions for a busy, hectic lifestyle. It can take all that daily dishwashing and turn it into one simple task, which is nice on days when you’re feeling too lazy to scrub. But if your appliance isn’t functioning properly or draining water from the bottom, you’ll be cursing that invention in no time. This blog explains things to do when your dishwasher doesn’t drain properly.

1. Run the disposal Water will not drain out of the dishwasher if there is a clog in the line that carries it away. If your sink is a garbage disposal, you could check to see if it’s clogged. If it is, you might need to call a plumber to take care of that problem. You should also check the pipes underneath your dishwasher to ensure they’re not obstructed. If they’re clogged, call in a plumber.

2. Clean the filter The filter inside your dishwasher can become clogged with dust, hair, and lint. If that happens, the water will not flow through it and might not drain properly. To correct this problem, remove the filter and scrape out any debris or lint buildup. After rinsing the filter in hot water and drying it thoroughly, you can replace it before you begin to run your dishwasher again.

3. Check for blockages A dishwasher can get blocked if it is not properly cleaned. Food particles, rust, or mold in the pipes that deliver water to the dishwasher can obstruct it. You might need to go through your dishwasher and remove any blockages you find for effective drainage.

4. Load the dishwasher correctly If you’ve cleaned your dishwasher, but it’s not draining, loading it correctly might be a bit of good advice. When you first load your dishwasher, make sure that every item is facing forward. If there are specific spots where water can accumulate, load the items there first.

5. Inspect the drain hose Every dishwasher has a drain hose that drains water out of the bottom. If something is stuck in it, the water will not be able to flow out and might cause clogs or suds in the dishwasher. You can inspect the hose by taking a long-handled container and placing it underneath your sink drain pipe. Pull up on the hose and inspect it to see if there’s anything stuck there.

6. Try vinegar and baking soda If none of these fixes work, try DIY tips like mixing water and vinegar in your dishwasher. Add 1 cup of white vinegar to the bottom of your dishwasher and 1 cup of baking soda. Run it with the regular cycle and see if that helps to clear anything out of the pipes.

7. Check the drain valve When you run a dishwasher, water is supposed to flow through the drain pump and drain into your plumbing system. If it’s not draining, the problem could be with the drain valve. You can check this by opening the cabinet beneath your dishwasher and checking the hose beneath it. See if the hose is clogged with debris or lint. If so, clean it out so that water will flow correctly again. As you can see, there are several reasons your dishwasher might not be draining, but that doesn’t mean that it’s beyond repair. Each of these steps can help you to troubleshoot the problem and find a quick fix to get water flowing again.…


August 2022

Contact With Us

    Contact Form

    * Required